產品名稱：SUTE(蜂窩式)陶瓷加熱器

   SUTE(蜂窩式)陶瓷加熱器采用的不是一般云母撓線方式制作，而是采用陶瓷條穿絲方式，因此該產品的功率比普通的要高0.5~1.5倍。發熱體為進口圓絲陶撓成彈簧狀穿入陶瓷條圈成,外罩采用日本產不銹鋼,中間采用高溫隔熱保溫棉(硅酸鋁纖維板)防止溫度外泄。陶瓷條是高頻陶瓷具有傳熱快、堅硬不易碎、高溫不變形不易老化等特點。

1、傳熱快,發熱均勻、工作穩定。
2、溫度不外泄、可節省電能，外罩用手觸摸不燙手，工作**。
3、產品的功率高，采用陶瓷條穿絲方式功率比普通的要高0.5~1.5倍
4、歐美耐高溫發熱絲，具有散熱快，發熱均勻，高溫穩定等特點，可長時間在600－800℃使用。
5、產品壽命長，由于原材料在高溫下老化比較慢因此產品壽命長。
6、符合國家GB各項技術要求。功率偏差＋5%∽－10%。
7、電氣強度：經電壓1500v/50Hz正弦交流電壓試驗，經1MIN無擊穿現象。
High temperature ceramic electric circle is not generally used in Mica torsion line production, but used to wear silk, pottery, so the products than the general power to the 0.5 to 1.5 times. Fever for the import of round wire Tao torsion spring-like penetration into ceramic laps of the 10%, Housing by the Japanese production of stainless steel, high temperature insulation between Cotton (silicate fibreboard) temperature to prevent leakage. Ceramics is a high-frequency ceramic heat with quick, hard non-friable, high temperature deformation is not difficult to aging and so on.
1, faster heat transfer, fever uniform, work and stability.
2, a temperature not compromised, can save power, housings do not touch hot hand, work safety.
3, high-power products, ceramic, wear silk way than ordinary power to 0.5 to 1.5 times
4, Europe and the United States high temperature fever silk, with rapid cooling, heating uniform, high temperature stability characteristics, can be a long time in the 600-800 ℃ use.
5, longer product life, as raw materials under high temperature aging more slowly so long product life.
6, in line with the state GB the technical requirements. Power deviation +5% ∽ -10%.
7, the electrical strength: 1500 v/50Hz sinusoidal voltage AC voltage test, no breakdown by 1 MIN phenomenon.